Molded Vacuum Interrupter

Molded Vacuum Interrupter is an interruption device that uses vacuum arc extinguishing technology and is commonly used in high-voltage power systems. Unlike traditional vacuum interrupters, the main feature of Molded Vacuum Interrupter is that its shell is injection molded with plastic or composite materials, which is more compact and lightweight. Vacuum medium is used inside to quickly extinguish the arc to prevent damage to the power system and equipment.
Send Inquiry
Description

Molded Vacuum Interrupter is an interruption device that uses vacuum arc extinguishing technology and is commonly used in high-voltage power systems. Unlike traditional vacuum interrupters, the main feature of Molded Vacuum Interrupter is that its shell is injection molded with plastic or composite materials, which is more compact and lightweight. Vacuum medium is used inside to quickly extinguish the arc to prevent damage to the power system and equipment.

The advantages of this interrupter design include smaller size, stronger high-voltage resistance, low maintenance requirements and good electrical insulation performance. It is widely used in various distribution systems, substations and other power facilities that require rapid current interruption.

 

The Benefits Of Molded Vacuum Interrupter Include

 

1. Efficient current interruption: quickly extinguish arcs and protect power equipment.

2. Strong reliability: long-term stable operation and reduced failures.

3. Save maintenance costs: low maintenance requirements, reduced maintenance work and expenses.

4. Environmental protection: no oil and harmful gas emissions, in line with green environmental protection requirements.

5. Strong adaptability: able to work normally in harsh environments.

 

P101

P102

P103

Technical Parameters

 

MAIN TECHNICAL DATA    
Data Unit Value
Rated Frequency Hz 50
Rated Voltage kV 12
Rated Short-duration Withstand Voltage(1min) kV 48/28in air
Rated Lightning Impulse Withstand Voltage kV 85/60 in air
Rated Current A 1600
Circuit Resistance at the Lowest Rated Contact Force μΩ ≤20
Rated Short-circuit Breaking Current kA 31.5
Rated Short-circuit Breaking Current Breaking Times Times 50
Rated Short-duration Withstand Current kA 31.5
Rated Duration of Short-circuit s 4
Rated Peak Withstand Current kA 80
Rated Short-circuit Making Current kA 80
Rated Operaing Sequence   O-0.3(0.5)s-CO-180s-CO
Contact Stroke mm 11±1
Contact Closing Force N 140±50
Force Required to hold contacts open at full stroke N 220±50
Average Opening Speed (first 75% stroke) m/s 1.1±0.2
Average Closing Speed (last 30% stroke) m/s 0.6±0.2
Rated Contact Force N 3100±200
Contact Force at the Touch Point N 2200±150
Contact Closing Bouncing Duration ms ≤2
Contact Opening and Closing Non-simultaneity ms ≤2
Contact Opening Rebound Amplitude mm ≤2
Storage Life Years 20
Mechanical Endurance Times 10000
Contact Erosion Limit mm 3

 

Hot Tags: molded vacuum interrupter, China molded vacuum interrupter manufacturers, suppliers, factory, vacuum interrupter with high breaking capacity, vacuum interrupter for thermal protection, Medium Voltage Vacuum Interrupter, indoor vacuum interrupter, vacuum interrupter for energy storage systems, vacuum interrupter for replacement protection

Send Inquiry

Send Inquiry